Video Splitter - 1 PC to 4 Monitors

1 PC to 4 Monitors 4 Port Video Splitter - 250 MHz - Legacy

* The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to four video outputs for monitors using analog signals.

* The signal boost obtained by using the VS-104 allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet.

* This is no mean feat, your average VGA card, over a standard VGA cable, send a clear VGA signal approximately 25 feet. This makes public broadcasts from a single computer very feasible.

* If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.

* Bandwidth is the term that is used to describe the signal capacity of these units.

* In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a giving signal.

* For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call.

* These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that is almost 42 times greater than a simple TV signal.

* This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1600 x 1200 in 24 or 32 bit true color mode at a refresh rate of 70Hz.

Features:

One video input with two video outputs Transmission distance of up to 210 feet Suitable for SVGA, VGA, and Multisync monitors Daisy-Chain multiple units together for even more outputs Power-save mode, when the computer is off the power indicator LED¡¯s flash

Specification :

Case Width 13.25 in.(33.65 cm.)

Height 13.25 in. (33.65 cm.)

Length 19.5 in. (49.53 cm.)

Dimensions Depth 6.5 in. (16.51 cm.)

Width 9.5 in. (24.13 cm.)